Polyurethane turning seals have the following advantages

1, do not need to open the mold, can be customized in small quantities, greatly saving the cost.

2. Short delivery time.

3, can process various shapes of non-standard sealing rings, such as: shaft, hole with sealing rings, dust and so on.

4, the use of high-quality imported polyurethane raw materials production, quality assurance.

Daily protection points of turning seals:

1. Because many of the dynamic and static rings of the seal are easy to crack, they may be damaged if accidentally bumped, so measures should be taken to avoid damage to the turning seals. Do not place the seal at will, generally can use clean fiber woven fabric to protect, do not use hands and other objects directly contact the sealing surface, is strictly prohibited in the handling, inspection and installation process there is any bump.

2. Avoid turning seals from contact with other liquids to prevent damage. Under normal circumstances, unless there are special provisions, the rubber sealing ring in the seal should not contact mineral oil or other oils, and it is strictly prohibited to contact corrosive chemical liquids.

The above is the daily protection points of turning seals. In the process of using and installing seals, if we do an effective job of protection, we can effectively extend the service life of turning seals.